HomePlumbingWhole-House Repipe CostMemphis, TN

Whole-House Repipe Cost in Memphis, TN (2026)

~$5,540
Average cost of whole-house repipe on a typical 1,500 sq ft home in Memphis in 2026.
Typical range: $2,770 – $13,860
vs. U.S. average: 8% lower
🔧
Plumbing labor in Memphis runs about $25/hour, about 17% below the U.S. median — which helps keep local prices below the national average.BLS OEWS · local trade wages

A whole-house repipe in Memphis typically runs about $5,540 for a typical 1,500 sq ft home, 8% lower than the U.S. average. Most local homeowners pay between $2,770 – $13,860 depending on the scope of work, the materials used (for example PEX vs copper), how accessible the plumbing is, and local labor rates. Because labor and code requirements vary by city, the same job can cost noticeably more or less than a national average.

Advertisement — responsive AdSense unit (in-article)

Whole-House Repipe cost in Memphis by material

MaterialTypical Memphis total
Partial repipe$3,230
PEX repipe$5,540
Copper repipe$10,160
Whole-House Repipe cost in Memphis by material
$0k$3k$6k$8k$11k$3,230Partial repipe$5,540PEX repipe$10,160Copper repipe
Advertisement — responsive AdSense unit (mid-content)

What drives whole-house repipe costs in Memphis

The biggest drivers of whole-house repipe cost in Memphis are the scope of the job, the materials (PEX, copper, or the unit itself), how accessible the pipes or fixtures are, local labor rates, and permit requirements. Older homes often cost more because outdated pipe or code upgrades come into play. The table and chart below show how the option you choose moves the price.

Climate & local factors NOAA Climate Normals

  • Humidity and aging fixtures can hide slow leaks — catching them early prevents costly water damage and mold.
  • Material choice matters: PEX is cheaper, faster to install, and freeze-tolerant; copper lasts longer but costs more in both material and labor.
  • If your home still has galvanized or polybutylene pipe, factor in a repipe — patch repairs on failing pipe rarely hold for long.
  • Bundling related work while walls or access are already open (shutoffs, expansion tank, venting) saves on repeat labor and trip charges.
  • Bringing older work up to current code (proper venting, an expansion tank, accessible shutoffs) can add cost but prevents a failed inspection.

What's included in a whole-house repipe in Memphis

A typical whole-house repipe quote in Memphis usually includes the new fixtures or materials, removal and disposal of the old, all fittings and connections, labor, pressure-testing, cleanup, and the plumbing permit where required. Reputable Memphis plumbers also warranty their workmanship, so compare what each bid covers — not just the bottom-line price.

How to save on whole-house repipe in Memphis

To keep whole-house repipe costs down in Memphis, get at least three quotes, ask whether PEX is an option (it's cheaper and faster than copper), and bundle related work while the walls or access are already open. Confirm each quote includes the permit, materials, and cleanup so there are no surprises, and weigh a higher-efficiency unit where it pays back on energy.

Local factors NOAA · climate

Memphis's climate is mild on plumbing — material choice (PEX vs copper) and code compliance matter more than weather here.

Permits & local rules Memphis open data

A plumbing permit is required — typically $100 – $300, usually pulled by your contractor. Verify current fees with the city.

Get free whole-house repipe quotes in Memphis

Compare bids from up to 3 licensed, local pros. No obligation, takes under a minute.

Sponsored — connects you with vetted contractors in your ZIP code. By submitting, you agree to be contacted about your project.

Whole-House Repipe cost: Memphis vs. nearby cities

CityLocation factorAvg. whole-house repipe
Memphis, TN0.92$5,540
Nashville, TN0.97$5,840
St. Louis, MO0.96$5,780
Birmingham, AL0.93$5,560
New Orleans, LA0.91$5,470

Frequently asked questions

How much does whole-house repipe cost in Memphis?
In Memphis, whole-house repipe costs about $5,540 on average, with most homeowners paying between $2,770 – $13,860. The exact price depends on the scope, materials, accessibility, and local labor and permit costs.
How long does whole-house repipe take in Memphis?
Most whole-house repipe jobs are completed within a day; larger jobs like a whole-house repipe can take several days.
Do I need a permit for whole-house repipe in Memphis?
Most Memphis jurisdictions require a plumbing permit and inspection, typically $100 – $300 and usually pulled by your plumber.
Why is whole-house repipe more or less expensive in Memphis?
Local cost reflects Memphis's labor rates, materials, and code requirements. We start from the national average and apply a local price factor of 0.92 (BEA Regional Price Parities (all items), 2023).
How can I lower my whole-house repipe cost in Memphis?
Get multiple quotes, ask whether PEX is an option instead of copper, and bundle related work while access is open. Confirm the permit, materials, and cleanup are included.

What homeowners in Memphis paid for whole-house repipe

No reader prices yet for whole-house repipe in Memphis. Had this done recently? Share what you paid to help your neighbors — it takes 20 seconds and we review every submission.

Advertisement — responsive AdSense unit (footer)

Related guides